* Required for Construction Management and Design and Industrial Management students.

Choose One Option:

Facilities Management: (39 Hours)
Program requirements and suggested course sequencing
Required:

Course Number	Course Title	Hours
CM310	Construction Building Codes	3
CM315	Construction Conracts & Legal Issues	3
CM325	Building Mechanical & Electrical Systems	3
CM330	Construction Planning & Scheduling	3
CM410	Construction Project Administration	3
FM331	Facility Design & Programming	3
FM431	Concepts of Space Planning	3
FM504	Facilities Management	3
AC221	Financial Accounting	3
ET470	Energy Management	3
TG126	Computer Aided Architectural Dafting	3
TG320	Residential Architectural Drafting & Design	3
IM317	Industrial Internship	3

Industrial Management (39 hours)
Program requirements and suggested course sequencing
Required:

Course Number	Course Title	Hours
ET160	Basic Electricity/Electronics	3
ET194	Fundamentals of PLC’s	3
IM313	Facilities Planning	3
IM315	Work Measurement	3
IM411	Total Quality Assurance	3
IM417	Manufacturing Resource Management	3
MG301	Principles of Management	3
MN170	Engineering Materials & Testing	3
MN203	Industrial Materials & Processes I	3
MN204	Industrial Materials & Processes II	3
QM352	Quantitative Methods	3
TG120	Computer Aided Engineering Graphics	3
TG325	Print Reading for Industry	3

Technical Graphics (39 hours)
Program requirements and suggested course sequencing
Required:

TG120	Computer Aided Engineering Graphics	3
TG180	Introduction to Industrial Graphics	3
TG220	Solid Modeling & Rapid Prototyping	3
TG284 MN170	Photography Fundamentals OR Engineering Materials & Testing	3 3
TG300	Vector and bitmapped Graphics for Industry	3
TG320 TG384	Residential Archictectural Drafting& Design OR Commercial Photography	3 3
TG325 TG480	Print Reading for Industry OR Advanced Industrial Animation	3 3
TG382 MN203	Electronic Publishing OR Industrial Materials & Processing I	3 3
TG322 TG482	Commercial Architectural Drafting & Design OR Multicolor Print Processes	3 3
TG324 TG386	Design Modeling & Processes OR Interactive Multimedia & Animation	3 3
TG380	3D Product Modeling & Animation	3
TG385	Non-Linear Video Editing for Industry	3
TG490	Advanced Graphics Projects	3

Technology – (21 hours) 
Program requirements and suggested course sequencing
The technology option is specifically designed for students who have earned accredited Associate of Applied Science (A.A.S.) degrees in technically-oriented programs and desire to complete a Bachelor of Science (B.S.) degree in Industrial Technology. In addition to credit for the transferable general education courses completed at the community college, students will also be awarded up to 34 hours credit for the approved technical transfer courses from their A.A.S. degrees.  

In addition, this option is available to students who have three years of related work experience and a recognized national certification or exam score.  These students submit a portfolio to the Department of Industrial and Engineering Technology to be reviewed/approved by the faculty. 

To complete the B.S. degree, students will meet their remaining University Studies requirements and the Industrial Technology required core courses.  In addition, they will work with their faculty advisors to select 21 credit hours of technical electives (must be at the 300-500 level), including some technical management coursework, to build upon the skills gained through the AAS degree.

This option is available in a variety of formats to meet students needs:

• on campus with a flexible schedule
• on campus through Southeast PM (as a combination of courses offered evenings, weekends, and online)
• in St. Louis area (as a combination of courses offered evenings, weekends, and online) - with an industrial management focus
• available completely online - with an industrial management focus

Contact the School of Polytechnic Studies Advising Center at (573) 651-5930 or e-mail polytech@semo.edu.

Telecommunications & Computer Networking
Program requirements and suggested course sequencing
Required:

ET160	Basic Electricity & Electronics	3
ET194	Fundamentals of Programmable Logic Controllers (PLCs)	3
ET245	Logic Circuits	3
ET254	Fiber Optics & Network Communications	3
ET255	Microcomputer Maintenance & Troubleshooting	3
ET275	Network Routing & Switching I	3
ET375	Network Routing & Switching II	3
ET395	Server Maintenance & Troubleshooting	3
ET425	Wireless Communication & Mobile Data Networks	3
ET435	Network Security	3
MI440	Web Design Electronic Computing	3
MI445	System Analysis & Design	3
MN412	Advanced Manufacturing Systems OR IM317 Cooperative Industrial Internship	3

Courses are updated regularly, so be sure to meet with your advisor to design your academic plan.

Printer-friendly

E-mail this page to a friend